SQL SERVER Questions

1. Which TCP/IP port does SQL Server run on? How can it be changed?

SQL Server runs on port 1433. It can be changed from the Network Utility TCP/IP properties.

2. What are the difference between clustered and a non-clustered index?

1.    A clustered index is a special type of index that reorders the way records in the table are physically stored. Therefore table can have only one clustered index. The leaf nodes of a clustered index contain the data pages. 
2.    A non clustered index is a special type of index in which the logical order of the index does not match the physical stored order of the rows on disk. The leaf node of a non clustered index does not consist of the data pages. Instead, the leaf nodes contain index rows.

3. What are the different index configurations a table can have?

A table can have one of the following index configurations:

1.    No indexes

2.    A clustered index

3.    A clustered index and many nonclustered indexes

4.    A nonclustered index

5.    Many nonclustered indexes

4. What are different types of Collation Sensitivity?

1.    Case sensitivity - A and a, B and b, etc.

2.    Accent sensitivity

3.    Kana Sensitivity - When Japanese kana characters Hiragana and Katakana are treated differently, it is called Kana sensitive.

4.    Width sensitivity - A single-byte character (half-width) and the same character represented as a double-byte character (full-width) are treated differently than it is width sensitive.

5. What is OLTP (Online Transaction Processing)?

In OLTP - online transaction processing systems relational database design use the discipline of data modeling and generally follow the Codd rules of data normalization in order to ensure absolute data integrity. Using these rules complex information is broken down into its most simple structures (a table) where all of the individual atomic level elements relate to each other and satisfy the normalization rules.

6. What's the difference between a primary key and a unique key?

Both primary key and unique key enforces uniqueness of the column on which they are defined. But by default primary key creates a clustered index on the column, where are unique creates a nonclustered index by default. Another major difference is that, primary key doesn't allow NULLs, but unique key allows one NULL only.

7. What is difference between DELETE and TRUNCATE commands?

Delete command removes the rows from a table based on the condition that we provide with a WHERE clause. Truncate will actually remove all the rows from a table and there will be no data in the table after we run the truncate command.

1.    TRUNCATE:

1.    TRUNCATE is faster and uses fewer system and transaction log resources than DELETE.

2.    TRUNCATE removes the data by deallocating the data pages used to store the table's data, and only the page deallocations are recorded in the transaction log.

3.    TRUNCATE removes all rows from a table, but the table structure, its columns, constraints, indexes and so on, remains. The counter used by an identity for new rows is reset to the seed for the column.

4.    You cannot use TRUNCATE TABLE on a table referenced by a FOREIGN KEY constraint. Because TRUNCATE TABLE is not logged, it cannot activate a trigger.

5.    TRUNCATE cannot be rolled back.

6.    TRUNCATE is DDL Command.

7.    TRUNCATE Resets identity of the table

2.    DELETE:

1.    DELETE removes rows one at a time and records an entry in the transaction log for each deleted row.

2.    If you want to retain the identity counter, use DELETE instead. If you want to remove table definition and its data, use the DROP TABLE statement.

3.    DELETE Can be used with or without a WHERE clause

4.    DELETE Activates Triggers.

5.    DELETE can be rolled back.

6.    DELETE is DML Command.

7.    DELETE does not reset identity of the table.

8. When is the use of UPDATE_STATISTICS command?

This command is basically used when a large processing of data has occurred. If a large amount of deletions any modification or Bulk Copy into the tables has occurred, it has to update the indexes to take these changes into account. UPDATE_STATISTICS updates the indexes on these tables accordingly.

9. What is the difference between a HAVING CLAUSE and a WHERE CLAUSE?

They specify a search condition for a group or an aggregate. But the difference is that HAVING can be used only with the SELECT statement. HAVING is typically used in a GROUP BY clause. When GROUP BY is not used, HAVING behaves like a WHERE clause. Having Clause is basically used only with the GROUP BY function in a query whereas WHERE Clause is applied to each row before they are part of the GROUP BY function in a query.

10. What are the properties and different Types of Sub-Queries?

1.    Properties of Sub-Query

1.    A sub-query must be enclosed in the parenthesis.

2.    A sub-query must be put in the right hand of the comparison operator, and

3.    A sub-query cannot contain an ORDER-BY clause.

4.    A query can contain more than one sub-query.

2.    Types of Sub-Query

1.    Single-row sub-query, where the sub-query returns only one row.

2.    Multiple-row sub-query, where the sub-query returns multiple rows,. and

3.    Multiple column sub-query, where the sub-query returns multiple columns

11. What is SQL Profiler?

SQL Profiler is a graphical tool that allows system administrators to monitor events in an instance of Microsoft SQL Server. You can capture and save data about each event to a file or SQL Server table to analyze later. For example, you can monitor a production environment to see which stored procedures are hampering performances by executing too slowly.

Use SQL Profiler to monitor only the events in which you are interested. If traces are becoming too large, you can filter them based on the information you want, so that only a subset of the event data is collected. Monitoring too many events adds overhead to the server and the monitoring process and can cause the trace file or trace table to grow very large, especially when the monitoring process takes place over a long period of time.

12. What are the authentication modes in SQL Server? How can it be changed?

Windows mode and Mixed Mode - SQL and Windows. To change authentication mode in SQL Server click Start, Programs, Microsoft SQL Server and click SQL Enterprise Manager to run SQL Enterprise Manager from the Microsoft SQL Server program group. Select the server then from the Tools menu select SQL Server Configuration Properties, and choose the Security page.

13. Which command using Query Analyzer will give you the version of SQL server and operating system?

SELECT SERVERPROPERTY ('productversion'), SERVERPROPERTY ('productlevel'), SERVERPROPERTY ('edition').

14. What is SQL Server Agent?

SQL Server agent plays an important role in the day-to-day tasks of a database administrator (DBA). It is often overlooked as one of the main tools for SQL Server management. Its purpose is to ease the implementation of tasks for the DBA, with its full- function scheduling engine, which allows you to schedule your own jobs and scripts.

15. Can a stored procedure call itself or recursive stored procedure? How much level SP nesting is possible?

Yes. Because Transact-SQL supports recursion, you can write stored procedures that call themselves. Recursion can be defined as a method of problem solving wherein the solution is arrived at by repetitively applying it to subsets of the problem. A common application of recursive logic is to perform numeric computations that lend themselves to repetitive evaluation by the same processing steps. Stored procedures are nested when one stored procedure calls another or executes managed code by referencing a CLR routine, type, or aggregate. You can nest stored procedures and managed code references up to 32 levels.

16. What is Log Shipping?

Log shipping is the process of automating the backup of database and transaction log files on a production SQL server, and then restoring them onto a standby server. Enterprise Editions only supports log shipping. In log shipping the transactional log file from one server is automatically updated into the backup database on the other server. If one server fails, the other server will have the same db and can be used this as the Disaster Recovery plan. The key feature of log shipping is that it will automatically backup transaction logs throughout the day and automatically restore them on the standby server at defined interval.

17. Name 3 ways to get an accurate count of the number of records in a table?

SELECT * FROM table1
SELECT COUNT(*) FROM table1
SELECT rows FROM sysindexes WHERE id = OBJECT_ID(table1) AND indid < 2

18. What does it mean to have QUOTED_IDENTIFIER ON? What are the implications of having it OFF?

When SET QUOTED_IDENTIFIER is ON, identifiers can be delimited by double quotation marks, and literals must be delimited by single quotation marks. When SET QUOTED_IDENTIFIER is OFF, identifiers cannot be quoted and must follow all Transact-SQL rules for identifiers.

19. What is the difference between a Local and a Global temporary table?

1.    A local temporary table exists only for the duration of a connection or, if defined inside a compound statement, for the duration of the compound statement. 
2.    A global temporary table remains in the database permanently, but the rows exist only within a given connection. When connection is closed, the data in the global temporary table disappears. However, the table definition remains with the database for access when database is opened next time.

20. What is the STUFF function and how does it differ from the REPLACE function?

STUFF function is used to overwrite existing characters. Using this syntax, STUFF (string_expression, start, length, replacement_characters), string_expression is the string that will have characters substituted, start is the starting position, length is the number of characters in the string that are substituted, and replacement_characters are the new characters interjected into the string. REPLACE function to replace existing characters of all occurrences. Using the syntax REPLACE (string_expression, search_string, replacement_string), where every incidence of search_string found in the string_expression will be replaced with replacement_string.

21. What is PRIMARY KEY?

A PRIMARY KEY constraint is a unique identifier for a row within a database table. Every table should have a primary key constraint to uniquely identify each row and only one primary key constraint can be created for each table. The primary key constraints are used to enforce entity integrity.

22. What is UNIQUE KEY constraint?

A UNIQUE constraint enforces the uniqueness of the values in a set of columns, so no duplicate values are entered. The unique key constraints are used to enforce entity integrity as the primary key constraints.

23. What is FOREIGN KEY?

A FOREIGN KEY constraint prevents any actions that would destroy links between tables with the corresponding data values. A foreign key in one table points to a primary key in another table. Foreign keys prevent actions that would leave rows with foreign key values when there are no primary keys with that value. The foreign key constraints are used to enforce referential integrity.

24. What is CHECK Constraint?

A CHECK constraint is used to limit the values that can be placed in a column. The check constraints are used to enforce domain integrity.

25. What is NOT NULL Constraint?

A NOT NULL constraint enforces that the column will not accept null values. The not null constraints are used to enforce domain integrity, as the check constraints.

26. How to get @@ERROR and @@ROWCOUNT at the same time?

If @@Rowcount is checked after Error checking statement then it will have 0 as the value of @@Recordcount as it would have been reset. And if @@Recordcount is checked before the error-checking statement then @@Error would get reset. To get @@error and @@rowcount at the same time do both in same statement and store them in local variable.

SELECT @RC = @@ROWCOUNT, @ER = @@ERROR

27. What is a Scheduled Jobs or What is a Scheduled Tasks?

Scheduled tasks let user automate processes that run on regular or predictable cycles. User can schedule administrative tasks, such as cube processing, to run during times of slow business activity. User can also determine the order in which tasks run by creating job steps within a SQL Server Agent job. E.g. back up database, Update Stats of Tables. Job steps give user control over flow of execution. If one job fails, user can configure SQL Server Agent to continue to run the remaining tasks or to stop execution.

28. What are the advantages of using Stored Procedures?

1.    Stored procedure can reduced network traffic and latency, boosting application performance.

2.    Stored procedure execution plans can be reused, staying cached in SQL Server's memory, reducing server overhead.

3.    Stored procedures help promote code reuse.

4.    Stored procedures can encapsulate logic. You can change stored procedure code without affecting clients.

5.    Stored procedures provide better security to your data.

29. What is a table called, if it has neither Cluster nor Non-cluster Index? What is it used for?

Unindexed table or Heap. Microsoft Press Books and Book on Line (BOL) refers it as Heap. A heap is a table that does not have a clustered index and, therefore, the pages are not linked by pointers. The IAM pages are the only structures that link the pages in a table together. Unindexed tables are good for fast storing of data. Many times it is better to drop all indexes from table and then do bulk of inserts and to restore those indexes after that.

30. Can SQL Servers linked to other servers like Oracle?

SQL Server can be linked to any server provided it has OLE-DB provider from Microsoft to allow a link. E.g. Oracle has an OLE-DB provider for oracle that Microsoft provides to add it as linked server to SQL Server group.

31. What is BCP? When does it used?

BulkCopy is a tool used to copy huge amount of data from tables and views. BCP does not copy the structures same as source to destination. BULK INSERT command helps to import a data file into a database table or view in a user-specified format.

32. How to implement one-to-one, one-to-many and many-to-many relationships while designing tables?

One-to-One relationship can be implemented as a single table and rarely as two tables with primary and foreign key relationships. One-to-Many relationships are implemented by splitting the data into two tables with primary key and foreign key relationships. Many-to-Many relationships are implemented using a junction table with the keys from both the tables forming the composite primary key of the junction table.

33. What is an execution plan? When would you use it? How would you view the execution plan?

An execution plan is basically a road map that graphically or textually shows the data retrieval methods chosen by the SQL Server query optimizer for a stored procedure or ad- hoc query and is a very useful tool for a developer to understand the performance characteristics of a query or stored procedure since the plan is the one that SQL Server will place in its cache and use to execute the stored procedure or query. From within Query Analyzer is an option called "Show Execution Plan" (located on the Query drop-down menu). If this option is turned on it will display query execution plan in separate window when query is ran again.

34. What is normalization?

Well a relational database is basically composed of tables that contain related data. So the Process of organizing this data into tables is actually referred to as normalization.

35. What is a Stored Procedure?

It is nothing but a set of T-SQL statements combined to perform a single task of several tasks. It is basically like a Macro so when you invoke the Stored procedure, you actually run a set of statements.

36.Can you give an example of Stored Procedure?

 sp_helpdb , sp_who2, sp_renamedb are a set of system defined stored procedures. We can also have user defined stored procedures which can be called in similar way.

37.What is a trigger?

 Triggers are basically used to implement business rules. Triggers is also similar to stored procedures. The difference is that it can be activated when data is added or edited or deleted from a table in a database.

38.What is a view? 

If we have several tables in a db and we want to view only specific columns from specific tables we cango for views. It would also suffice the needs of security some times allowing specfic users to see only specific columns based on the permission that we can configure on the view. Views also reduce the effort that is required for writing queries to access specific columns every time.

39.What is an Index?

 When queries are run against a db, an index on that db basically helps in the way the data is sorted to process the query for faster and data retrievals are much faster when we have an index.

40.What are the types of indexes available with SQL Server?

There are basically two types of indexes that we use with the SQL Server. Clustered and the Non-Clustered.

41.What is the basic difference between clustered and a non-clustered index?

 The difference is that, Clustered index is unique for any given table and we can have only one clustered index on a table. The leaf level of a clustered index is the actual data and the data is resorted in case of clustered index. Whereas in case of non-clustered index the leaf level is actually a pointer to the data in rows so we can have as many non-clustered indexes as we can on the db.

42.What are cursors?

 Well cursors help us to do an operation on a set of data that we retreive by commands such as Select columns from table. For example : If we have duplicate records in a table we can remove it by declaring a cursor which would check the records during retreival one by one and remove rows which have duplicate values.

43.When do we use the UPDATE_STATISTICS command?

This command is basically used when we do a large processing of data. If we do a large amount of deletions any modification or Bulk Copy into the tables, we need to basically update the indexes to take these changes into account. UPDATE_STATISTICS updates the indexes on these tables accordingly.

44.Which TCP/IP port does SQL Server run on?

 SQL Server runs on port 1433 but we can also change it for better security.

45.From where can you change the default port?

 From the Network Utility TCP/IP properties –> Port number.both on client and the server.

46.Can you tell me the difference between DELETE & TRUNCATE commands?

 Delete command removes the rows from a table based on the condition that we provide with a WHERE clause. Truncate will actually remove all the rows from a table and there will be no data in the table after we run the truncate command.

47.Can we use Truncate command on a table which is referenced by FOREIGN KEY?

- No. We cannot use Truncate command on a table with Foreign Key because of referential integrity.

48.What is the use of DBCC commands?

- DBCC stands for database consistency checker. We use these commands to check the consistency of the databases, i.e., maintenance, validation task and status checks.

49.Can you give me some DBCC command options?(Database consistency check)

 DBCC CHECKDB - Ensures that tables in the db and the indexes are correctly linked.

DBCC CHECKALLOC - To check that all pages in a db are correctly allocated. 

DBCC SQLPERF - It gives report on current usage of transaction log in percentage.

 DBCC CHECKFILEGROUP - Checks all tables file group for any damage.

50.What command do we use to rename a db? sp_renamedb ‘oldname’ , ‘newname’

Well sometimes sp_reanmedb may not work you know because if some one is using the db it will not accept this command so what do you think you can do in such cases? 

 In such cases we can first bring to db to single user using sp_dboptions and then we can rename that db and then we can rerun the sp_dboptions command to remove the single user mode.

51.What is the difference between a HAVING CLAUSE and a WHERE CLAUSE?

  Having Clause is basically used only with the GROUP BY function in a query. WHERE Clause is applied to each row before they are part of the GROUP BY function in a query.

52.What do you mean by COLLATION? 

 Collation is basically the sort order. There are three types of sort order Dictionary case sensitive

Dictonary - case insensitive and Binary.

53.What is a Join in SQL Server? - Join actually puts data from two or more tables into a single result set.

54.Can you explain the types of Joins that we can have with Sql Server? 

 There are three types of joins: Inner Join, Outer Join, Cross Join

55.When do you use SQL Profiler? 

 SQL Profiler utility allows us to basically track connections to theSQL Server and also determine activities such as which SQL Scripts are running, failed jobs etc..

56.What is a Linked Server? 

 Linked Servers is a concept in SQL Server by which we can add other SQL Server to a Group and query both the SQL Server dbs using T-SQL Statements.

57.Can you link only other SQL Servers or any database servers such as Oracle? 

 We can link any server provided we have the OLE-DB provider from Microsoft to allow a link. For Oracle we have a OLE-DB provider for oracle that microsoft provides to add it as a linked server to the sql server group.

58.Which stored procedure will you be running to add a linked server? 

 sp_addlinkedserver, sp_addlinkedsrvlogin

59.What are the OS services that the SQL Server installation adds? 

 MS SQL SERVER SERVICE, SQL AGENT SERVICE, DTC (Distribution transac co-ordinator)

60.Can you explain the role of each service? 

 SQL SERVER - is for running the databases SQL AGENT - is for automation such as Jobs, DB Maintanance, Backups DTC - Is for linking and connecting to other SQL Servers

61.How do you troubleshoot SQL Server if its running very slow? 

First check the processor and memory usage to see that processor is not above 80% utilization and memory not above 40-45% utilization then check the disk utilization using Performance Monitor, Secondly, use SQL Profiler to check for the users and current SQL activities and jobs running which might be a problem. Third would be to run UPDATE_STATISTICS command to update the indexes

Lets say due to N/W or Security issues client is not able to connect to server or vice versa. How do you troubleshoot? - First I will look to ensure that port settings are proper on server and client Network utility for connections. ODBC is properly configured at client end for connection ——Makepipe & readpipe are utilities to check for connection. Makepipe is run on Server and readpipe on client to check for any connection issues.

62.What are the authentication modes in SQL Server? 

 Windows mode and mixed mode (SQL & Windows).

63.Where do you think the users names and passwords will be stored in sql server? - They get stored in master db in the sysxlogins table.

64.What is log shipping? 

 Can we do logshipping with SQL Server 7.0

 Logshipping is a new feature of SQL Server 2000. We should have two SQL Server - Enterprise Editions. From Enterprise Manager we can configure the logshipping. In logshipping the transactional log file from one server is automatically updated into the backup database on the other server. If one server fails, the other server will have the same db and we can use this as the DR (disaster recovery) plan.

Let us say the SQL Server crashed and you are rebuilding the databases including the master database what procedure to you follow? - For restoring the master db we have to stop the SQL Server first and then from command line we can type SQLSERVER –m which will basically bring it into the maintenance mode after which we can restore the master db.

Let us say master db itself has no backup. Now you have to rebuild the db so what kind of action do you take? - (I am not sure- but I think we have a command to do it).

65.What is BCP? When do we use it? 

 BulkCopy is a tool used to copy huge amount of data from tables and views. But it won’t copy the structures of the same.

66.What should we do to copy the tables, schema and views from one SQL Server to another? 

 We have to write some DTS packages for it.